question

Brent Batas (Lisk) avatar image
Brent Batas (Lisk) asked

Using Wireshark to capture PlayFab packets

To help debug server issues, I want to be able to provide the PlayFab support team with Wireshark captures of PlayFab packets.

To set it up, I have a few questions:

1) How to enable SSL in Wireshark?

2) Where to find the SSL key that my PlayFab packets are sent with?

3) How to filter traffic so that only my PlayFab packets are logged to a capture file (rather than all network traffic)

10 |1200
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

1 Answer

·
brendan avatar image
brendan answered

Sorry for the confusion on this - just get a regular capture. The SSL key is the server private key, which you do not have access to. As to how to enable SSL, it should already be enabled - just make sure it's a version of the tool that was built with SSL support. For filtering, that's usually something done post-capture, in the viewer.

1 comment
10 |1200
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.

Akash avatar image Akash commented ·

Since the server private key is not available to anyone, the packets are top level secured right?

0 Likes 0 ·

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 2 attachments (including images) can be used with a maximum of 512.0 KiB each and 1.0 MiB total.